|
|
| Watchman II-D is a solid state track control designed
to operate with 3 rail or 2 rail trains, using AC or DC track power. Watchman
II-D is used to create a station stop and also operate your accessories.
Watchman II-D can also create blocking systems when used in conjunction
with Gargraves track. (Note: minimum 3 Watchman II-D's needed to run 2
trains.) By sensing the passing train through an insulated rail, Watchman
II-D's inputs (timer, set, and reset) can be activated. |
|
Features:
- Adjustable timer (one-shot or continuous mode) from
2 through 8 seconds, to set the length of time to stop the train or
activate accessories. (Note: Timer will not reset until the last car
is off of the insulated outside rail track.) The one-shot timer is
used for a Station Stop. The continuous timer mode is used to make
a block when using Gargraves track or can operate accessories while
the train is at the activation track.
- Set and reset are used to turn your Watchman II-D
on or off from the desired locations on your layout
- AC or DC Operation (TRCD's required in DC mode)
- Two output relays (single pole, double throw) are
provided with 10 amp current capability. Indication lights (LED's)
are to show activation of relays.
- Output relay contacts are protected by one 10 amp
automatic resettable circuit breakers and one 10 amp fuse.
- Watchman II-D operating voltage is 10-20 volts AC
or DC
- Snap-in mounting plate for easy installation
- 5 year Warranty
|
| View full Instructions
and Wiring Diagrams included
with every Watchman 2D |
