Switch Buddy-T is available in three models:

Switch Buddy-T - This controller has two inputs (Straight and Curved). Each input is activated by a locomotive passing over an insulated outside rail, which is placed before the straight and curved portion of the switch. These inputs cause Switch Buddy-T to operate the Tortoise Switch Machine and supply a Stop feature to stop the train while the Switch Machine is in motion.

Switch Buddy-T Plus - Contains the same features as above with the addition of a third input (Reset). This feature allows Switch Buddy-T Plus to be prioritized straight or curved. After the Switch Machine operates the switch, allowing the locomotive to pass through, Switch Buddy-T Plus will reset the switch to the prioritized position (straight or curved).

Switch Buddy-T Plus R - Contains the same features as the above unit, with the addition of an output relay to switch track power to different rails for longer switches. Example: Curtis Excel #6 and #8 series switches.

NOTE:

• Operating a Double Crossover Switch will require two Switch Buddy-T's or Switch Buddy-T Plus's.
• If your locomotive operates with a reverse unit activated, a Loco Pause Transformer is needed to prevent the reverse unit from dropping into neutral. Typically, one Loco Pause Transformer is sufficient for a medium to large train layout.

Switch Buddy-T

• Two inputs (Straight and Curved)
• One single pole/double throw 10 Amp relay protected by an automatic resetting 10 Amp circuit breaker. (Stop Feature)
• Snap-in mounting plate
• Fast-on wiring connections
• Operates on 10 - 18 Volts AC
• Easy to install instructions complete with wiring plan

Switch Buddy-T Plus:

• Same great features as Switch Buddy-T
• Add One Reset input to prioritize switch straight or curved

Switch Buddy-T Plus R:

• Same features as Switch Buddy-T Plus
• Add One single pole/double throw 10 Amp relay protected by an automatic resetting 10 amp circuit breaker (To switch track power on long switches)

View the Instructions and Wiring Diargrams included with all Switch Buddy-T products

Control 1A is a solid state controller that is used to operate a Tortoise Switch Machine on your high-rail switches. Control 1A provides a true non-derailing feature with a straight and curved input. The inputs are activated by a locomotive passing over insulated outside rail sections of track. To activate, simply place one insulated outside rail section of track in front of the turnout and a second insulated outside rail section of track in front of the straight section of the switch.

Please note: insulated outside rail track sections must be placed far enough ahead of the switch to allow Tortoise Motor to fully operate before the train enters the switch.

By adding pushbutton switches to these input lines, manual control can be achieved from your control panel. Panel light monitoring is provided from the Tortoise Switch Motor.

Control 1A provides the DC power needed to operate the Tortoise Switch Motor from the AC power applied to the unit.

Features:

• 2 sensing inputs (1 straight, 1 curved)
• Snap in mounting plate
• Operates on 10-18 volts AC
• Circuitry protected by an input fuse
• An electric lock is provided to hold the switch motor in it's position
• Easy to install instructions complete with color wiring plan